FRONT CONSOLE BOX REMOVAL


  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. Open the glove compartment door.

    2. A003XK6

      Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.

  2. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A003WH5

      Disengage the 5 claws, clip and 2 guides, and remove the upper No. 2 console panel garnish.

  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A003XQR

      Disengage the 4 claws, clip and 3 guides, and remove the upper No. 1 console panel garnish.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Open the console compartment door.

    2. Using a moulding remover, disengage the 9 claws of the vehicle rear side.

      A003XLPE01
      Text in Illustration
      *a Protective Tape - -

    3. Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws of the vehicle front side as shown in the illustration.

    4. Disengage the clamp.

    5. Disconnect each connector and remove the upper console panel sub-assembly.

  5. REMOVE REAR CONSOLE BOX POCKET


    1. A003V5Y

      Remove the rear console box pocket.

  6. REMOVE CONSOLE BOX CARPET


    1. A003VMZ

      Remove the console box carpet.

  7. REMOVE REAR CONSOLE BOX ASSEMBLY


    1. A003W28

      Remove the 2 screws and 4 bolts.

    2. A003YLE

      Disengage the 8 guides and remove the rear console box assembly.