POWER OUTLET SOCKET REMOVAL


  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. Open the glove compartment door.

    2. A003XK6

      Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.

  2. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A003WH5

      Disengage the 5 claws, clip and 2 guides, and remove the upper No. 2 console panel garnish.

  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A003XQR

      Disengage the 4 claws, clip and 3 guides, and remove the upper No. 1 console panel garnish.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Open the console compartment door.

    2. Using a moulding remover, disengage the 9 claws of the vehicle rear side.

      A003XLPE01
      Text in Illustration
      *a Protective Tape - -

    3. Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws of the vehicle front side as shown in the illustration.

    4. Disengage the clamp.

    5. Disconnect each connector and remove the upper console panel sub-assembly.

  5. REMOVE POWER OUTLET SOCKET ASSEMBLY


    1. A003WX0

      Turn the power outlet socket assembly in the direction shown in the illustration to disengage the claw.

    2. A003YH4

      Using a screwdriver, disengage the claw, and then push in the power outlet socket assembly until the protrusion of the power outlet socket assembly comes into contact with the power outlet socket cover.

    3. A003VH3

      As shown in the illustration, align the protrusion of the power outlet socket assembly and the notch of the power outlet socket cover.

    4. A003YGS

      Using a screwdriver, disengage the claw and remove the power outlet socket assembly from the power outlet socket cover.

  6. REMOVE POWER OUTLET SOCKET COVER NO.2


    1. A003W38

      Disengage the 2 claws and remove the power outlet socket cover.