FRONT EVAPORATOR TEMPERATURE SENSOR REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE BLOWER ASSEMBLY (w/o PTC Heater)


    1. Disconnect the connector and disengage each clamp.

    2. Disengage the 3 screws and guide, and remove the blower assembly.

      A003VM3

  3. REMOVE BLOWER ASSEMBLY (w/ PTC Heater)


    1. Remove the felt tape to the extent that the screw can be removed.

    2. A003YHY

      Remove the screw and disconnect the quick heater connector.

    3. Disengage each clamp.

    4. Disconnect the connector.

    5. Disengage the 3 screws and guide, and remove the blower assembly.

      A003VM3

  4. REMOVE COOLER EXPANSION VALVE


    1. A003XJY

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.

  5. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY


    1. A003WMN

      Remove the packing.

      Note

      Remove the packing carefully because it will be reused.

    2. A003W4Q

      Remove the 4 screws.

    3. Disengage the 4 claws and remove the lower heater case.

    4. A003Y30

      Disengage the clamp and remove the cooler evaporator sub-assembly with the No. 1 cooler thermistor.

    5. A003WXT

      Remove the 2 O-rings from the cooler evaporator sub-assembly.

  6. REMOVE NO. 1 COOLER THERMISTOR


    1. A003X7F

      Remove the No. 1 cooler thermistor.