ROOM TEMPERATURE SENSOR REMOVAL


  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. Open the glove compartment door.

    2. A003XK6

      Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.

  2. REMOVE ROOM TEMPERATURE SENSOR ASSEMBLY


    1. A003XYU

      Disengage the 2 claws and remove the room temperature sensor assembly as shown in the illustration.

    2. A003V9A

      Disconnect the hose and connector.

  3. REMOVE ROOM TEMPERATURE SENSOR


    1. A003YDQ

      Disengage the 2 claws and remove the room temperature sensor from the cooler air hose clamp.