FRONT BLOWER MOTOR REMOVAL


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A003ZFG

      Disengage the 2 clips, claw and guide.

    2. Disengage the clamp.

    3. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A003VC3

      Disengage the 2 clips, claw and 2 guides.

    2. Disengage the clamp.

    3. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.

  3. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. A003XA2

      Disengage the clamp and disconnect the connector.

    2. Remove the 3 screws and front blower motor sub-assembly.

      Note

      Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.

  4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. Remove the felt tape to the extent that the screw can be removed.

    2. A003XV9E01
      Text in Illustration
      *1 Quick Heater Connector

      Remove the quick heater connector screw.

    3. Disengage the clamp and disconnect the connector.

    4. Remove the 3 screws and front blower motor sub-assembly.

      Note

      Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.