AIR CONDITIONING PANEL REMOVAL


  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure for the RH and LH side Click here.

  2. REMOVE INSTRUMENT SIDE PANEL


    1. A003ZIT

      Using a moulding remover, disengage the 3 claws, clip and 4 guides, and remove the instrument side panel RH.

    2. Disconnect the connector.

  3. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)


    1. A003YLO

      Disengage the 5 clips and remove the No. 3 instrument cluster finish panel garnish.

  4. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)


    1. A003Z33

      Disengage the 4 clips and remove the No. 3 instrument cluster finish panel garnish.

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. Open the glove compartment door.

    2. A003XK6

      Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.

  6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A003XPS

      Disengage the 7 claws and remove the air conditioning control assembly as shown in the illustration.

    2. Disconnect the connector.

  7. REMOVE LOWER HEATER CONTROL BASE


    1. A003ZPD

      Remove the 8 screws and remove the lower heater control base.

  8. REMOVE CENTER CLUSTER MODULE CIRCUIT

    Note

    When disassembling the center cluster module circuit, eliminate static electricity by touching the vehicle body to prevent electrical components from being damaged.


    1. A003WSQ

      Disengage the 2 guides and remove the center cluster module circuit.