AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE AIR CONDITIONING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Set Temperature Shift Normal Function to control with the shifted temperature against the displayed temperature +2 C, +1 C, Normal, -1 C or -2 C Air conditioning amplifier assembly
        Compressor Mode Automatic Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly
        Air Inlet Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on Manual or Automatic Air conditioning amplifier assembly
        Foot/DEF Auto Mode ON Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on OFF or ON Air conditioning amplifier assembly
        Foot/DEF Automatic Blow Up Function ON Function to automatically increase the blower level when the defroster is on OFF or ON Air conditioning amplifier assembly
        Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C Air conditioning amplifier assembly
        ECO MODE Cancel OFF Function to cancel the ECO mode drive when item is on OFF or ON Air conditioning amplifier assembly
        Noise and Vibration Reduction OFF Function to change speed of the compressor when item is on OFF or ON Air conditioning amplifier assembly

    2. Customizing with the combination meter assembly

      Tech Tips


      • Press and hold DISP switch (steering pad switch assembly) when entering an item.

      • Briefly press DISP switch (steering pad switch assembly) when selecting an item.


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Auto A/C Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on Manual or Automatic Air conditioning amplifier assembly

      4. Press and hold DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.