REAR CENTER SEAT OUTER BELT ASSEMBLY INSTALLATION


  1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A003WVEE01
      Text in Illustration
      *1 Protruding Part

      Install the rear center seat outer belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the rear center seat outer belt assembly to overlap the protruding part of the rear seatback frame.

  2. INSTALL REAR SEATBACK EDGE PROTECTOR


    1. Clean the installation surface of the rear seatback frame sub-assembly RH.

    2. Attach the 12 pieces of double-sided tape and install the rear seatback edge protector to the rear seatback frame sub-assembly RH.

      A003VTPE01
      Text in Illustration
      *1 Double-sided Tape - -
      *a Rear Seatback Edge Protector *b Front Side of Rear Seatback Frame RH
      *c Upper Limit of Headrest Support Bracket *d Insert
      *e Reference Line *f Bask Side of Rear Seatback Frame RH

  3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD


    1. Temporarily install the separate type rear seatback cover with pad RH to the rear seatback frame sub-assembly RH.

    2. A003VLO

      Engage the 4 claws to install the 2 rear seat center headrest supports.

    3. A003Y24

      Engage the 4 claws to install the 2 rear seat headrest supports.

    4. A003VY7

      Engage the 4 hooks.

    5. A003YP2

      Engage the 10 hooks.

    6. Install 9 new clips to the separate type rear seatback cover RH.

    7. A003ZVW

      Engage the 9 clips.

    8. A003WLX

      Install the separate type rear seatback cover with pad RH with 3 new clips.

  4. INSTALL REAR SEATBACK COVER RH


    1. A003ZGP

      Engage the 4 claws to install the rear seatback cover RH.

    2. w/ Rear Seatback Cover:


      1. Install the rear seatback cover RH.

        Tech Tips

        Use the same procedure for the LH side and RH side.

  5. INSTALL REAR SEAT SHOULDER BELT COVER


    1. A003WR5

      Engage the 4 claws to install the rear seat shoulder belt cover.

  6. INSTALL SEAT BELT ANCHOR COVER CAP


    1. A003VDC

      Engage the 2 claws to install the seat belt anchor cover cap.

  7. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE RH


    1. A003ZN4

      Engage the 5 claws.

    2. Install the rear seatback lock control lever base RH with the screw.

  8. INSTALL REAR SEATBACK LOCK STRIKER COVER RH


    1. A003VBS

      Engage the 2 guides and claw to install the rear seatback lock striker cover RH.

  9. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the fastener to connect the rear No. 1 floor board sub-assembly.

  10. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  11. INSTALL REAR SEAT HEADREST ASSEMBLY

  12. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A003YR7

      Engage the claw to install a new rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure the LH side and RH side.

  13. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A003XOT

      Pass the rear center seat outer belt assembly through the rear seat cushion assembly.

    3. Install the rear center seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A003W09

      Engage the guide as shown in the illustration.

    5. Pass the rear seat inner with center belt assembly LH and rear seat inner belt assembly through the rear seat cushion assembly as shown in the illustration.

      A003Z3XE01
      Text in Illustration
      *1 Rear Seat Inner Belt Assembly *2 Rear Seat Inner with Center Belt Assembly LH
    6. A003YOA

      Engage the 2 hooks of the seat cushion to the vehicle body as shown in the illustration.

    7. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.