REAR CENTER SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. A003ZN5E01
        Text in Illustration
        *1 Hook
        *2 Guide

        Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Disengage the guide of the seat cushion from the seatback.

    3. A003YWG
      Standard Measurement
      *a 100 mm (3.94 in.) or less

      Remove the bolt and disconnect the rear center seat outer belt assembly.

    4. Pull out the rear center seat outer belt assembly from the rear seat cushion assembly.

    5. Remove the rear seat cushion assembly.

  2. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A003Y4L

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure the LH side and RH side.

  3. REMOVE REAR SEAT HEADREST ASSEMBLY

  4. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  5. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Disengage the fastener and disconnect the rear No. 1 floor board sub-assembly.

    2. A003WZ1

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER RH


    1. A003VBS

      Disengage the 2 guides and claw, and remove the rear seatback lock striker cover RH.

  7. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH


    1. A003ZN4

      Remove the screw.

    2. Disengage the 5 claws and remove the rear seatback lock control lever base RH.

  8. REMOVE SEAT BELT ANCHOR COVER CAP


    1. A003VDC

      Disengage the 2 claws and remove the seat belt anchor cover cap.

  9. REMOVE REAR SEAT SHOULDER BELT COVER


    1. A003WR5

      Disengage the 4 claws and remove the rear seat shoulder belt cover.

  10. REMOVE REAR SEATBACK COVER RH


    1. A003ZGP

      Disengage the 4 claws and remove the rear seatback cover RH.

    2. w/ Rear Seatback Cover:


      1. Remove the rear seatback cover RH.

        Tech Tips

        Use the same procedure for the RH side and LH side.

  11. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD


    1. A003WLX

      Using a clip remover, remove the 3 clips.

      Note

      The clips must not be reused.

    2. A003ZVW

      Using a clip remover, disengage the 9 clips.

      Note

      The clips must not be reused.

    3. Remove the 9 clips from the separate type rear seatback cover RH.

      Note

      The clips must not be reused.

    4. A003YP2

      Disengage the 10 hooks.

    5. A003VY7

      Disengage the 4 hooks.

    6. A003WJWE01
      Text in Illustration
      *1 Double-sided Tape

      Detach the 6 pieces of double-sided tape.

    7. A003Y24

      Disengage the 4 claws and remove the 2 rear seat headrest supports.

    8. A003VLO

      Disengage the 4 claws and remove the 2 rear seat center headrest supports.

    9. Remove the separate type rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.

  12. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. A003ZSCE01
      Text in Illustration
      *1 Double-sided Tape

      Detach the 6 pieces of double-sided tape and remove the rear seatback edge protector.

  13. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A003X61

      Remove the nut and rear center seat outer belt assembly.