REAR SEAT INNER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. A003ZN5E01
        Text in Illustration
        *1 Hook
        *2 Guide

        Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Disengage the guide of the seat cushion from the seatback.

    3. A003YWG
      Standard Measurement
      *a 100 mm (3.94 in.) or less

      Remove the bolt and disconnect the rear center seat outer belt assembly.

    4. Pull out the rear center seat outer belt assembly from the rear seat cushion assembly.

    5. Remove the rear seat cushion assembly.

  2. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A003Y4L

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure the LH side and RH side.

  3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/o Seat Heater System)


    1. A003V4Y

      Remove the bolt and rear seat inner with center belt assembly LH.

  4. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/ Seat Heater System)


    1. A003VD1

      Disconnect the 2 connectors.

    2. Disengage the 2 clamps.

    3. Remove the bolt and rear seat inner with center belt assembly LH.

  5. REMOVE REAR SEAT INNER BELT ASSEMBLY (w/o Seat Heater System)


    1. A003XKN

      Remove the bolt and rear seat inner belt assembly.

  6. REMOVE REAR SEAT INNER BELT ASSEMBLY (w/ Seat Heater System)


    1. A003XXQ

      Disconnect the connector.

    2. Disengage the 2 clamps.

    3. Remove the bolt and rear seat inner belt assembly.