REAR SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY (for RH)


    1. A003WVVE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly (for RH))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear RH seat belt fastened Below 1 Ω
      1 - 2 Rear RH seat belt not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly (for RH).

  2. INSPECT REAR SEAT INNER W/ CENTER BELT ASSEMBLY LH (for LH)


    1. A003W9RE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner w/ Center Belt Assembly LH (for LH))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear LH seat belt fastened Below 1 Ω
      1 - 2 Rear LH seat belt not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner w/ center belt assembly LH (for LH).

  3. INSPECT REAR SEAT INNER W/ CENTER BELT ASSEMBLY LH (for Center)


    1. A003Y7VE05
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner w/ Center Belt Assembly LH (for Center))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear center seat belt fastened Below 1 Ω
      1 - 2 Rear center seat belt not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner w/ center belt assembly LH (for center).