FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver)


    1. A003ZBEE02
      Text in Illustration
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      X15-1 - X15-2 Driver seat belt fastened Below 1 Ω
      X15-1 - X15-2 Driver seat belt unfastened 10 kΩ or higher
      for RHD
      Tester Connection Condition Specified Condition
      W9-1 - W9-2 Driver seat belt fastened Below 1 Ω
      W9-1 - W9-2 Driver seat belt unfastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for driver).