FRONT SEAT CUSHION HEATER (for Power Seat) INSTALLATION


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER ASSEMBLY)


    1. A003YWI

      Using hog ring pliers, install 21 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A003WN5

      Using hog ring pliers, install the separate type front seat cushion cover (front seat cushion heater assembly) to the separate type front seat cushion pad with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A003WAV

      Engage each hook.

    2. A003XD5

      Engage the 4 hooks.

    3. w/ Seat Heater System:


      1. A003WRF

        Connect the connector.

      2. Engage the 3 clamps to connect the seat heater wire harness.

      3. A003ZL4

        Engage the clamp to connect the seat heater wire harness.

      4. Connect the connector.

    4. A003X68

      Engage the fastener to secure the side airbag wire harness.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. A003YFN

      Engage the 4 claws to install the front seat inner cushion shield.

  4. INSTALL FRONT SEAT CUSHION SHIELD


    1. w/o Seat Position Memory System:


      1. A003XBRE01
        Text in Illustration
        *A w/ Seat Position Memory System:
        *1 Wire Harness Cover

        Connect the connector.

    2. w/ Seat Position Memory System:


      1. Connect the 2 connectors.

    3. Engage the 2 clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. A003ZTDE01

      Engage the clip and guide (1).

    7. Engage the guide (2) and 8 claws to install the front seat cushion shield.

    8. A003VUA

      Connect the rubber band.

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A003XZF

      Install the clip.

    2. A003X4T

      Engage the 2 guides and claw as shown in the illustration.

    3. A003VHL

      Engage the guide as shown in the illustration.

    4. Install the front inner No. 1 seat cushion shield with the screw.

  6. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A003V8D

      Engage the 4 claws to install the reclining power seat switch knob.

  7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A003WFS

      Engage the 4 claws to install the slide and vertical power seat switch knob.

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A003ZGLE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.

    4. Connect each connector.

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here