FRONT SEAT CUSHION HEATER (for Power Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector.

    2. Disengage each clamp under the front seat assembly.

    3. A003ZDF

      Disengage the clamp.

    4. Remove the nut and front seat inner belt assembly.

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A003V6T

      Using a moulding remover, disengage the 4 claws and remove the slide and vertical power seat switch knob.

  4. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A003V44

      Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.

  5. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A003ZU6

      Remove the screw.

    2. Disengage the guide as shown in the illustration.

    3. A003X79

      Disengage the claw and 2 guides, and remove the front inner No. 1 seat cushion shield as shown in the illustration.

    4. A003XZF

      Using a clip remover, remove the clip.

  6. REMOVE FRONT SEAT CUSHION SHIELD


    1. A003VUA

      Separate the rubber band of the separate type front seatback cover.

    2. A003ZTDE01

      Disengage the 8 claws and guide (1).

    3. Disengage the clip and guide (2), and disconnect the front seat cushion shield.

    4. A003XBRE01
      Text in Illustration
      *A w/ Seat Position Memory System:
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    5. Remove the wire harness from the wire harness cover.

    6. Disengage the 2 clamps.

    7. w/o Seat Position Memory System:


      1. Disconnect the connector and remove the front seat cushion shield.

    8. w/ Seat Position Memory System:


      1. Disconnect the 2 connectors and remove the front seat cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A003YFN

      Disengage the 4 claws and remove the front seat inner cushion shield.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A003X68

      Disengage the fastener and separate the side airbag wire harness.

    2. w/ Seat Heater System:


      1. A003ZL4

        Disconnect the connector.

      2. Disengage the clamp and disconnect the seat heater wire harness.

      3. A003WRF

        Disconnect the connector.

      4. Disengage the 3 clamps and disconnect the seat heater wire harness.

    3. A003XD5

      Disengage the 4 hooks.

    4. A003WAV

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER ASSEMBLY)


    1. A003Z2L

      Remove the 2 hog rings.

    2. A003WQE

      Remove the 21 hog rings and the separate type front seat cushion cover (front seat cushion heater assembly) from the separate type front seat cushion pad.