FRONT SEAT CUSHION HEATER (for Manual Seat) INSTALLATION


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER ASSEMBLY)


    1. A003YWI

      Using hog ring pliers, install the separate type front seat cushion cover (front seat cushion heater assembly) to the separate type front seat cushion pad with 21 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A003WN5

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad to the front seat cushion frame.

    2. A003YYW

      Engage each hook.

    3. A003XWD

      Engage the 4 hooks.

    4. for Front Passenger Side:


      1. A003XDS

        Engage the clamp to connect the connector as shown in the illustration.

    5. w/ Seat Heater System:


      1. A003VHS

        Engage the 2 clamps to connect the seat heater wire harness.

      2. Connect the connector.

      3. A003ZL4

        Engage the clamp to connect the seat heater wire harness.

      4. Connect the connector.

    6. A003X68

      Engage the fastener to secure the side airbag wire harness.

    7. A003WIE

      Connect the rubber band.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. A003WI6

      Engage the 4 claws to install the front seat inner cushion shield.

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A003Z35E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

    3. Connect each connector.

  5. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A003X66E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

    3. Connect each connector.

  6. INSTALL FRONT SEAT CUSHION SHIELD


    1. A003X3J

      Engage the clip.

    2. Engage the 11 claws.

    3. Install the front seat cushion shield with the screw.

  7. INSTALL VERTICAL ADJUSTING HANDLE (for 6 Way Seat Type)


    1. A003ZAO

      Install the vertical adjusting handle with the screw.

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A003V2M

      Engage the claw to install the reclining adjuster release handle.

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here