FRONT SEATBACK HEATER (for Power Seat) INSTALLATION


  1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (FRONT SEATBACK HEATER ASSEMBLY)


    1. A003Y25

      Using hog ring pliers, install the separate type front seatback cover (front seatback heater assembly) to the separate type front seatback pad with 14 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad to the front seatback spring assembly.

    2. A003Z38E01

      Attach the bracket of the separate type front seatback cover to the front seatback spring assembly in the order indicated in the illustration.

    3. Install the separate type front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:


      • For vehicles with side airbags, the seatback cover must be securely installed. Otherwise, the side airbags may not deploy properly.

      • Make sure that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    4. A003YOT

      Engage the 4 claws to install the 2 front seat headrest supports.

    5. A003WJ0

      Engage the fastener.

    6. A003XWE

      Close the 2 fasteners.

    7. A003V1K

      Using hog ring pliers, install 5 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    8. A003WWS

      Engage the 2 fasteners.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here