LUMBAR SWITCH REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A003ZU6

      Remove the screw.

    2. Disengage the guide as shown in the illustration.

    3. A003X79

      Disengage the claw and 2 guides, and remove the front inner No. 1 seat cushion shield as shown in the illustration.

    4. A003XZF

      Using a clip remover, remove the clip.

  3. REMOVE FRONT SEAT CUSHION SHIELD


    1. A003VUA

      Separate the rubber band of the separate type front seatback cover.

    2. A003ZTDE01

      Disengage the 8 claws and guide (1).

    3. Disengage the clip and guide (2), and disconnect the front seat cushion shield.

    4. A003XBRE01
      Text in Illustration
      *A w/ Seat Position Memory System:
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    5. Remove the wire harness from the wire harness cover.

    6. Disengage the 2 clamps.

    7. w/o Seat Position Memory System:


      1. Disconnect the connector and remove the front seat cushion shield.

    8. w/ Seat Position Memory System:


      1. Disconnect the 2 connectors and remove the front seat cushion shield.

  4. REMOVE LUMBAR SWITCH


    1. A003WG9

      Disengage the 4 claws and remove the lumbar switch.