OCCUPANT DETECTION SENSOR (for Power Seat) INSTALLATION


  1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. A003WES

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 21 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A003Y3O

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  3. INSTALL FRONT SEAT CUSHION INNER SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  4. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  6. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  7. INSTALL SLIDE POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A003ZIYE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.

    4. Connect each connector.

  9. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver side Click here.