OCCUPANT DETECTION SENSOR (for Power Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver side Click here.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector.

    2. Disengage each clamp under the front seat assembly.

    3. A003ZV0

      Disengage the clamp.

    4. Remove the nut and front seat inner belt assembly.

  3. REMOVE SLIDE POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  4. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Tech Tips

    Use the same procedure as for the driver side Click here.

  5. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  6. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  7. REMOVE FRONT SEAT CUSHION INNER SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  9. REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. A003XX7

      Remove the 2 hog rings.

    2. A003W72

      Remove the 21 hog rings and occupant detection sensor (separate type front seat cushion pad) from the separate type front seat cushion cover.