OCCUPANT DETECTION SENSOR (for Manual Seat) INSTALLATION


  1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. A003XOV

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 21 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A003ZTL

      Using hog ring pliers, install 2 new hog rings.

      Note

      Be careful not to damage the cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A003X66E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

    3. Connect each connector.

  5. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver side Click here.

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Tech Tips

    Use the same procedure as for the driver side Click here.

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here