FRONT SEAT ASSEMBLY (for Manual Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A003VTI

      Remove the seat adjuster cover cap RH.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A003YB9E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for 6 Way Seat Type)


    1. A003ZAO

      Remove the screw and vertical adjusting handle.

  4. REMOVE FRONT SEAT CUSHION SHIELD


    1. A003X3J

      Remove the screw.

    2. Disengage the 11 claws and clip, and remove the front seat cushion shield.

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disconnect each connector.

    2. Disengage each clamp under the front seat assembly.

    3. A003XPN

      Remove the nut and front seat inner belt assembly.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. Disconnect each connector.

    2. Disengage each clamp under the front seat assembly.

    3. A003ZSY

      Remove the nut and front seat inner belt assembly.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A003WI6

      Disengage the 4 claws and remove the front seat inner cushion shield.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A003WIE

      Disconnect the rubber band.

    2. A003X68

      Disengage the fastener and separate the seat side airbag wire harness.

    3. w/ Seat Heater System:


      1. A003ZL4

        Disconnect the connector.

      2. Disengage the clamp and disconnect the seat heater wire harness.

      3. A003VHS

        Disconnect the connector.

      4. Disengage the 2 clamps and disconnect the seat heater wire harness.

    4. for Front Passenger Side:


      1. A003VXX

        Disengage the clamp and disconnect the connector as shown in the illustration.

    5. A003XWD

      Disengage the 4 hooks.

    6. A003YYW

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A003Z2L

      Remove the 2 hog rings.

    2. A003WQE

      Remove the 21 hog rings and the separate type front seat cushion cover.

  10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A003WA1

      Disengage the 2 fasteners.

    2. A003YSE

      Remove the 5 hog rings.

    3. A003VTJ

      Open the 2 fasteners.

    4. A003WJ0

      Disengage the fastener.

    5. A003YC9

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A003VUX

      Remove the nut and disconnect the front seatback cover bracket.

    7. Remove the separate type front seatback cover with pad from the seat frame.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A003WQZ

      Remove the 14 hog rings and separate type front seatback cover.

  12. REMOVE FRONT SEAT CUSHION COVER


    1. A003ZT9E01
      Text in Illustration
      *1 Double-sided Tape

      Detach the 3 pieces of double-sided tape and remove the front seat cushion cover.

  13. REMOVE FRONT SEATBACK COVER


    1. A003WILE01
      Text in Illustration
      *1 Double-sided Tape

      Detach the 4 pieces of double-sided tape and remove the front seatback cover.

  14. REMOVE FRONT SEAT AIRBAG ASSEMBLY

    Click here

  15. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for 6 Way Seat Type)


    1. A003ZLQ

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  16. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for 6 Way Seat Type)


    1. A003V2G

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  17. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A003Y91

      Disengage the guide and remove the reclining adjuster inside cover LH.

  18. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A003WNU

      Disengage the guide and remove the reclining adjuster inside cover RH.

  19. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for 6 Way Seat Type)


    1. A003ZR5

      Remove the screw.

    2. Disengage the 2 guides and remove the front seat cushion edge protector LH.

  20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for 4 Way Seat Type)


    1. A003Z6B

      Remove the screw.

    2. Disengage the 2 guides and remove the front seat cushion edge protector LH.

  21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for 6 Way Seat Type)


    1. A003ZIM

      Remove the screw.

    2. Disengage the 2 guides and remove the front seat cushion edge protector RH.

  22. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for 4 Way Seat Type)


    1. A003WM8

      Remove the screw.

    2. Disengage the 2 guides and remove the front seat cushion edge protector RH.

  23. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)


    1. A003VPK

      Separate the wire harness from the 2 hooks.

    2. A003VQZ

      Disconnect the connector.

    3. Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position airbag sensor with the seat slide position sensor protector.

    4. A003Y0N

      Remove the seat position airbag sensor from the seat slide position sensor protector as shown in the illustration.

  24. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A003V3K

      Disconnect the connector.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  25. REMOVE FRONT SEAT WIRE (w/ Seat Heater System)


    1. A003ZB9

      Disengage the 2 clamps and remove the front seat wire.

  26. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A003XNS

      Remove the 4 bolts and the separate type front seatback spring assembly.

  27. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A003WSAE01
      Text in Illustration
      *1 Hook
      *2 Handle End

      Disengage the 2 hooks and 2 handle ends, and remove the seat track adjusting handle.