PRE-CRASH BRAKE CANCEL SWITCH INSTALLATION


  1. INSTALL PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for LHD)


    1. A003V30

      Engage the 2 claws to install the pre-crash brake cancel switch assembly.

  2. INSTALL PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for RHD)


    1. A003Y2W

      Engage the 2 claws to install the pre-crash brake cancel switch assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the clip.

    4. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E>.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 2 clips.

    4. Install the No. 1 instrument panel under cover sub-assembly with the screw <E>.