Click here

STEERING PAD INSTALLATION

Click here
Click here
  1. Click here

    INSTALL HORN BUTTON ASSEMBLY


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    3. A003WWD

      Connect the 2 airbag connectors to the horn button assembly.

      Note:

      • When connecting any airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    4. Push in the 2 locks to install the 2 airbag connectors.

    5. Connect the horn connector to the horn button assembly.

    6. A003VC6

      Push the horn button assembly to engage the 3 pins.

      Note:

      • Make sure that the pins are securely inserted into the steering holes.

      • Make sure to engage the 2 upper pins first.

      • Make sure that the horn button assembly is securely installed.

  2. Click here

    INSTALL LOWER NO. 3 STEERING WHEEL COVER


    1. A003YEE

      Engage the claw to install the lower No. 3 steering wheel cover.

  3. Click here

    INSTALL LOWER NO. 2 STEERING WHEEL COVER


    1. A003Z6I

      Engage the claw to install the lower No. 2 steering wheel cover.

  4. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  5. Click here

    INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE


    1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.

  6. Click here

    INSTALL DECK FLOOR BOX RH


    1. Engage the 6 guides.

    2. Install the deck floor box RH with the clip.

  7. Click here

    INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.

  8. Click here

    INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  9. Click here

    INSTALL REAR NO. 2 FLOOR BOARD


    1. Install the rear No. 2 floor board.

  10. Click here

    INSPECT HORN BUTTON ASSEMBLY


    1. Make sure that the horn sounds.

      Tip:

      If the horn does not sound, inspect the horn system (Click here).

  11. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    (Click here)

  12. Click here

    INSPECT SRS WARNING LIGHT

    (Click here)