Click here

INNER REAR VIEW MIRROR INSPECTION

Click here
Click here
  1. Click here

    INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ REAR VIEW MONITOR SYSTEM, w/o NAVIGATION SYSTEM)


    1. A003VGZE01

      Inspect the operation of the electrochromic inner mirror.

      Table 1. Text in Illustration
      *1 Forward Sensor *2 Black Colored Tape
      *3 Bright *4 Dark
      *5 Battery - -
      *a

      Component without harness connected

      (Inner Rear View Mirror)

      		 - -

      1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

      2. Press the AUTO switch.

      3. Attach black colored tape to the forward sensor to prevent it from sensing.

      4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

        Standard
        Mirror surface changes from bright to dark.

      5. Measure the voltage according to the Value(s) in the table below.

        Standard Voltage
        Tester Connection Condition Specified Condition
        4 - 5

        Inner rear view mirror surface

        Bright → Dark

        		 Below 1 V → 1.25 V

        If the result is not as specified, replace the mirror assembly.

  2. Click here

    INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o REAR VIEW MONITOR SYSTEM)


    1. A003X0PE01

      Inspect the operation of the electrochromic inner mirror.

      Table 2. Text in Illustration
      *1 Forward Sensor *2 Black Colored Tape
      *3 Bright *4 Dark
      *5 Battery - -
      *a

      Component without harness connected

      (Inner Rear View Mirror)

      		 - -

      1. Connect a positive (+) lead from the battery to terminal 4 and a negative (-) lead to terminal 1.

      2. Press the AUTO switch.

      3. Attach black colored tape to the forward sensor to prevent it from sensing.

      4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

        Standard
        Mirror surface changes from bright to dark.

      5. Measure the voltage according to the Value(s) in the table below.

        Standard Voltage
        Tester Connection Condition Specified Condition
        3 - 2

        Inner rear view mirror surface

        Bright → Dark

        		 Below 1 V → 1.25 V

        If the result is not as specified, replace the mirror assembly.