METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus:


        1. for Warning: Customize Setting / Combination Meter / Warning.

        2. for Display: Customize Setting / Combination Meter / Display.

      5. Select the setting by referring to the table below.

        Note


        • Be sure to record the current value before customizing.

        Tech Tips

        The following items can be customized using the intelligent tester.

        Warning
        Tester Display Default Content Setting Relevant ECU
        Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Rear Seatbelt Warning Buzzer*2 ON Function to turn on/off the rear seat belt warning buzzer ON or OFF Combination meter assembly
        Reverse Buzzer Continual Function to change the type of the reverse warning buzzer Single or Continual Combination meter assembly

        • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

        • *2: w/ Rear Seat Belt Warning

    2. Customizing with the combination meter assembly

      Tech Tips


      • Press and hold the DISP switch (steering pad switch assembly) when entering an item.

      • Briefly pressed the DISP switch (steering pad switch assembly) when selecting an item.


      1. Turn the power switch on (IG).

      2. Select the following menus: SETTINGS / METER SETTING.

      3. Select the setting by referring to the table below.

        Note


        • Be sure to record the current value before customizing.

        Tech Tips

        The following items can be customized operating the combination meter assembly.

        Meter Setting
        Tester Display Default Content Setting Relevant ECU
        TACHO METER AUTO Function to change the tachometer setting AUTO, KEEP ON, OFF Combination meter assembly
        ECO LAMP ECO DRIVE SUPPORT Function to change the illumination level ECO DRIVE SUPPORT, KEEP ON, OFF Combination meter assembly
        SPORT LAMP AUTO Function to change the sport illumination AUTO, OFF Combination meter assembly
        LAMP BRIGHTNESS STANDARD Function to change the illumination light BRIGHT, STANDARD Combination meter assembly
        EV INDICATOR AUTO Function to change the EV indicator setting AUTO, OFF Combination meter assembly
        LANGUAGE ENGLISH Function to change the multi-information display language ENGLISH, FRENCH, SPANISH Combination meter assembly
        UNITS KM (L/1100KM) or MILES (MPG)*1 Function to change the multi-information display unit KM (KM/L), KM (L/100KM), MILES (MPG) Combination meter assembly

        • *1: The default setting is changed according to the vehicle specification

      4. Press and hold DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.