LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Power switch ACC signal/ON or OFF

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 -
      IG SW Power switch IG signal/ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal/ON or OFF

      ON: Rear door RH open

      OFF: Rear door closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal/ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back door Courtesy SW Back door courtesy light switch signal/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door unlock detection switch RH signal/ON or OFF

      ON: Front door RH unlocked

      OFF: Front door RH locked

      		 -
      FR Door Courtesy Front door RH condition signal/ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Lock Pos Front door unlock detection switch LH signal/ON or OFF

      ON: Front door LH unlocked

      OFF: Front door LH locked

      		 -
      FL Door Courtesy Front door LH condition signal/ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      RR-Door Lock Pos SW Rear door unlock detection switch RH signal/ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door unlock detection switch LH signal/ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Interior Light Control Operation of the illuminated entry system/OFF or ON

      OFF: The system not operated

      ON: The system operated

      		 Customized value displayed
      I/L ON W/Door Key Unlock Setting of the function that lights up the interior lights when the doors are unlocked/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed
      Lighting Time Lighting time of the delay control function (illuminated entry system)/15s, 7.5s or 30s

      15s: 15 seconds

      7.5s: 7.5 seconds

      30s: 30 seconds

      		 Customized value displayed
      Room Light when Aprchd Setting of the function that lights up the interior lights when a key enters any actuation area/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed
      Inside Foot Light Setting of the function that lights up the footwell lights (Always)/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed
      Center Console Spot Light Setting of the function that lights up the center console spot light/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed
      I/L when ACC OFF Setting of the function that lights up the interior lights when the power switch on (ACC)/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed
      Light Control Setting of the function that lights up the footwell lights (while Driving)/OFF or ON

      OFF: The function not provided

      ON: The function provided

      		 Customized value displayed

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Front interior lights and rear interior light ON/OFF Interior light on/off switch off (not pushed), interior light door switch on (not pushed) and all doors closed
      Fr Foot Light Footwell lights ON/OFF Power switch off
      Center Consol Spot LGT Center console spot lights (red, blue) ON/OFF Power switch off
      Entry&Start
      Tester Display Test Part Control Range Diagnostic Note
      Power/Engine SW Light Power switch illumination ON/OFF All doors closed