REAR DOOR COURTESY SWITCH INSTALLATION


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the bolt.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH LH (for LH Side)


    1. Engage the 6 claws.

    2. Install the rear seat side garnish LH with the clip.

  3. INSTALL REAR SEAT SIDE GARNISH RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL REAR SEAT SIDE COVER RH (for RH Side)


    1. Engage the 3 claws and 2 clips to install the rear seat side cover RH.

  5. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly LH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the fastener to connect the rear No. 2 floor board sub-assembly.

  6. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the fastener to connect the rear No. 1 floor board sub-assembly.

  7. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A003YR7

      Engage the claw to install a new rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure the LH side and RH side.

  8. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A003XOT

      Pass the rear center seat outer belt assembly through the rear seat cushion assembly.

    3. Install the rear center seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A003W09

      Engage the guide as shown in the illustration.

    5. Pass the rear seat inner with center belt assembly LH and rear seat inner belt assembly through the rear seat cushion assembly as shown in the illustration.

      A003Z3XE01
      Text in Illustration
      *1 Rear Seat Inner Belt Assembly *2 Rear Seat Inner with Center Belt Assembly LH
    6. A003YOA

      Engage the 2 hooks of the seat cushion to the vehicle body as shown in the illustration.

    7. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.

  9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  10. INSTALL REAR DOOR SCUFF PLATE


    1. Engage the 4 claws, 2 guides and 2 clips to install the rear door scuff plate LH.