ELECTRICAL KEY OSCILLATOR (for Front Floor) INSTALLATION


  1. INSTALL NO. 1 ELECTRICAL KEY OSCILLATOR


    1. Engage the clamp and install the No. 1 electrical key oscillator.

      Note

      Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL CONSOLE BOX LH


    1. Engage the guide and 2 claws.

    2. Engage the 3 clips.

    3. Install the console box LH with the bolt <A> and clip.

  3. INSTALL CONSOLE BOX INSERT


    1. Engage the 2 claws and 2 clips to install the console box insert.

  4. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 2 guides and 6 claws to install the integration control and panel assembly.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A003X2P

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  6. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here