ELECTRICAL KEY OSCILLATOR (for Front Floor) REMOVAL


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A003XQZ

      Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

  3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A003WBB

      Disengage the 6 claws and 2 guides.

    2. Disengage the clamp.

    3. Disconnect each connector and remove the integration control and panel assembly.

  4. REMOVE CONSOLE BOX INSERT


    1. A003Z6E

      Disengage the 2 clips and 2 claws, and remove the console box insert.

  5. REMOVE CONSOLE BOX LH


    1. A003WSO

      Remove the bolt <A>.

    2. Using a clip remover, remove the clip.

    3. Using a clip remover, disengage the 3 clips.

    4. Disengage the 2 claws and guide, and remove the console box LH.

  6. REMOVE NO. 1 ELECTRICAL KEY OSCILLATOR


    1. A003VST

      Disconnect the connector.

    2. Disengage the clamp and remove the No. 1 electrical key oscillator.

      Note

      Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.