INTRUSION SENSOR INSTALLATION


  1. INSTALL INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/o Sliding Roof)


    1. Install the intrusion sensor (theft warning ultrasonic sensor) to the base with the 4 screws.

    2. A003XTTE01
      Text in Illustration
      *1 Switch lever
      *2 Switch knob

      Install the board so that the switch lever securely engages with the hole of the switch knob as shown in the illustration.

    3. Install the cover with the 7 screws.

    4. Engage the 2 clamps.

    5. Install the 2 screws and connect the connector.

    6. A003ZKH

      Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

    7. w/ Microphone:


      1. Engage the clamp and connect the connector.

      2. A003WZP

        Put the tape back to the positions shown in the illustration in order to secure the cord to the map light assembly.

  2. INSTALL INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Sliding Roof)


    1. Install the intrusion sensor (theft warning ultrasonic sensor) to the base with the 4 screws.

    2. A003XTTE01
      Text in Illustration
      *1 Switch lever
      *2 Switch knob

      Install the board so that the switch lever securely engages with the hole of the switch knob as shown in the illustration.

    3. Install the cover with the 7 screws.

    4. w/ Microphone:


      1. Engage the clamp and connect the connector.

      2. A003V9C

        Put the tape back to the position shown in the illustration in order to secure the cord to the map light assembly.

    5. Engage the 6 clamps.

    6. Install the 2 screws and connect the connector.

  3. INSTALL MAP LIGHT ASSEMBLY


    1. Connect the connector.

    2. A003YQ4E01

      Engage the 3 guides and 4 clips to install the map light assembly as shown in the illustration.

    3. Close the overhead console.