THEFT DETERRENT SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE THEFT DETERRENT SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Security or Wireless Door Lock

      5. Select the setting by referring to the table below.

        Security
        Display Default Content Setting Relevant ECU
        Intrusion Win Opened*1 OFF This function sets the sensitivity of the intrusion sensor when a door window is open. ON or OFF Main Body ECU (Multiplex Network Body ECU)
        Security control with mechanism key*2 OFF This function set to be able to release security alarm with the mechanism key ON or OFF
        Intrusion Sensor Sensitivity Level*1 N+Sound This function that adjusts sensitivity of the sensor that detects the invasion. Normal, Low, Lowest, High, Highest or N+Sound

        • *1: w/o Door Ajar Warning Buzzer Function

        • *2: w/ Airbag Cut Off Switch

        Wireless Door Lock
        Display Default Content Setting Relevant ECU
        Panic Function*1 ON This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds. ON or OFF Main Body ECU (Multiplex Network Body ECU)

        • *: w/ Panic Switch