SECURITY HORN ASSEMBLY REMOVAL


  1. REMOVE REAR NO. 2 FLOOR BOARD


    1. Remove the rear No. 2 floor board.

  2. REMOVE REAR DECK FLOOR BOX


    1. Remove the rear deck floor box.

  3. REMOVE REAR NO. 3 FLOOR BOARD


    1. Remove the rear No. 3 floor board.

  4. REMOVE DECK FLOOR BOX RH


    1. A003Z5J

      Remove the clip.

    2. Disengage the 6 guides and remove the deck floor box RH.

  5. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE


    1. A003VKN

      Disengage the 4 claws and 2 guides, and remove the rear floor board upper No. 3 plate.

  6. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)


    1. Remove the rear No. 4 floor board.

  7. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)


    1. A003WPK

      Disengage the 2 clips and 3 guides, and remove the rear No. 4 floor board.

  8. REMOVE DECK FLOOR BOX LH (w/o Woofer)


    1. A003WLJ

      Remove the clip.

    2. Disengage the 6 guides and remove the deck floor box LH.

  9. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  10. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A003X65

      Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board sub-assembly.

  11. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A003YRO

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  12. REMOVE REAR NO. 1 FLOOR BOARD


    1. A003ZU1

      Remove the bolt.

    2. Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board.

  13. REMOVE DECK TRIM SERVICE HOLE COVER


    1. A003YBSE01

      Disengage the 2 claws and guide (A).

    2. Disengage the 2 guides (B) and remove the deck trim service hole cover.

  14. REMOVE REAR DECK TRIM COVER


    1. A003YUE

      Disengage the 4 clips and remove the rear deck trim cover.

  15. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  16. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  17. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. A003ZN5E01
        Text in Illustration
        *1 Hook
        *2 Guide

        Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Disengage the guide of the seat cushion from the seatback.

    3. A003YWG
      Standard Measurement
      *a 100 mm (3.94 in.) or less

      Remove the bolt and disconnect the rear center seat outer belt assembly.

    4. Pull out the rear center seat outer belt assembly from the rear seat cushion assembly.

    5. Remove the rear seat cushion assembly.

  18. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A003Y4L

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure the LH side and RH side.

  19. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Disengage the fastener and disconnect the rear No. 1 floor board sub-assembly.

    2. A003WZ1

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  20. REMOVE REAR SEAT SIDE COVER RH


    1. A003X7P

      Disengage the 3 claws and 2 clips, and remove the rear seat side cover RH.

  21. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  22. REMOVE ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  23. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  24. REMOVE TONNEAU COVER HOOK


    1. A003X3PE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and pin, and remove the tonneau cover hook.

      Tech Tips

      Tape the screwdriver tip before use.

  25. REMOVE TONNEAU COVER HOLDER CAP

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  26. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    1. A003Z1EE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the No. 2 room light assembly.

  27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  28. REMOVE THEFT WARNING SIREN ASSEMBLY


    1. A003ZW4

      Disconnect the connector.

    2. Remove the 2 nuts and theft warning siren assembly.