DOOR CONTROL RELAY INSTALLATION

INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Audio)

1. Connect each connector.

2. Install the radio tuner opening cover with bracket with the 4 bolts <A>.

INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio)

1. Connect each connector.

2. Install the radio receiver assembly with bracket with the 4 bolts.

INSTALL AIR CONDITIONING CONTROL ASSEMBLY

1. Connect the connector.

2. 

   Engage the 7 claws to install the air conditioning control assembly.

INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

1. Connect each connector.

2. Engage the clamp.

3. Engage the 2 guides and 6 claws to install the integration control and panel assembly.

INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

1. 

   Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

1. Connect each connector.

2. Engage the clamp.

3. 

   Engage the 12 claws to install the upper console panel sub-assembly.

   Note:

   When installing the upper console panel sub-assembly, make sure not to pinch the wire harness connected to the front end of the remote touch (w/ Navigation System).

4. Close the console compartment door.

INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

1. Engage the 3 guides, clip and 4 claws to install the upper No. 1 console panel garnish.

INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

1. Engage the 2 guides, clip and 5 claws to install the upper No. 2 console panel garnish.

INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

1. 

   Engage the 4 guides and 7 claws to install the lower center instrument panel finish panel.

2. Close the glove compartment door.

INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

1. Engage the 5 clips to install the No. 3 instrument cluster finish panel garnish.

INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

1. Engage the 4 clips to install the No. 3 instrument cluster finish panel garnish.

INSTALL INSTRUMENT SIDE PANEL

1. Connect the connector.

2. 

   Engage the 4 guides, clip and 3 claws to install the instrument side panel RH.

INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.

INSTALL DECK FLOOR BOX RH

1. Engage the 6 guides.

2. Install the deck floor box RH with the clip.

INSTALL REAR NO. 3 FLOOR BOARD

1. Install the rear No. 3 floor board.

INSTALL REAR DECK FLOOR BOX

1. Install the rear deck floor box.

INSTALL REAR NO. 2 FLOOR BOARD

1. Install the rear No. 2 floor board.