WIRELESS DOOR LOCK BUZZER INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD models.

  • The procedure listed below is for an LHD model.

  • Perform the procedure on the driver side of the vehicle.


  1. INSTALL WIRELESS DOOR LOCK BUZZER


    1. Engage the clamp to install the wireless door lock buzzer.

    2. Connect the connector.

  2. INSTALL FRONT FENDER LINER


    1. Install the front fender liner RH with the 6 clips and 6 screws.

    2. Install the bolt.

    3. Install 2 new grommets.

    4. Using a 4 mm hexagon wrench, install the 3 screws.

    5. A003Z7WE01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  3. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }