POWER DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Master Switch / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear right door courtesy light switch signal/ON or OFF

      ON: Rear right door open

      OFF: Rear right door closed

      		 -
      RL Door Courtesy SW Rear left door courtesy light switch signal/ON or OFF

      ON: Rear left door open

      OFF: Rear left door closed

      		 -
      Door Lock SW-Lock Front passenger door control switch lock signal/ON or OFF

      ON: Lock side of front passenger door control switch pushed

      OFF: Lock side of front passenger door control switch not pushed

      		 -
      Door Lock SW-Unlock Front passenger door control switch unlock signal/ON or OFF

      ON: Unlock side of front passenger door control switch pushed

      OFF: Unlock side of front passenger door control switch not pushed

      		 -
      Door Key SW-Lock Driver door key-linked lock/unlock switch lock signal/ON or OFF

      ON: Driver door key cylinder turned to lock position

      OFF: Driver door key cylinder not turned to lock position

      		 -
      D Door Key SW-UL Driver door key-linked lock/unlock switch unlock signal/ON or OFF

      ON: Driver door key cylinder turned to unlock position

      OFF: Driver door key cylinder not turned to unlock position

      		 -
      FR Door Lock Pos Front door RH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy Front door RH courtesy light switch signal/ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy Front door LH courtesy light switch signal/ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal/ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch signal/ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Back Door Courtesy SW Back door courtesy switch signal/ ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Back Door Open Back door lock/Permit or Prohibt

      Permit: Back door unlocked

      Prohibt: Back door locked

      		 -
      Back Door Open Handle SW*1 Back door opener switch signal/ ON or OFF

      ON: Back door opener switch pushed

      OFF: Back door opener switch not pushed

      		 -
      Unlock Key Twice Key-linked 2-step unlock function/ ON or OFF Customized value displayed -
      Auto Lock Speed-sensitive automatic door lock function/ON or OFF Customized value displayed -
      Auto Lock/Shift Shift-linked automatic door lock function/ON or OFF Customized value displayed -
      Auto Unlock/Shift Shift-linked automatic door unlock function/ON or OFF Customized value displayed -
      All Unlock/Open-Close Driver door-linked automatic door unlock function/ON or OFF Customized value displayed -
      The Number of DTC Number of trouble codes/Min.: 0 or Max.: 255 Number of DTCs will be displayed -

      *1: w/o Entry System Back Door Open Fuction

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Door Lock Switch Status Driver door control switch lock signal/ON or OFF

      ON: Lock side of driver door control switch pushed

      OFF: Lock side of driver door control switch not pushed

      		 -
      Door Unlock Switch Status Driver door control switch unlock signal/ON or OFF

      ON: Unlock side of driver door control switch pushed

      OFF: Unlock side of driver door control switch not pushed

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Test Part Control Range Diagnostic Note
      Door Lock Door lock motor UNLOCK/LOCK/OFF -
      D-Door Unlock Driver door lock motor ON/OFF -
      Shock Detection Unlock Door lock motor UNLOCK/LOCK -
      Trunk and Back-Door Open Back door lock motor ON/OFF -