POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Door Lock.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Unlock Key Twice

        ON*1

        OFF*2

        		 Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Lock

        ON*2

        OFF*1

        		 Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Lock/Shift

        ON*1

        OFF*2

        		 Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Unlock/Shift

        ON*1

        OFF*2

        		 Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). ON or OFF Main body ECU (Multiplex network body ECU)
        All Unlock/Open-Close OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. ON or OFF Main body ECU (Multiplex network body ECU)

        • *1: for G.C.C. countries, Australia and New Zealand

        • *2: except G.C.C. countries, Australia and New Zealand

    2. Customizing with the Multi-display (w/ Navigation System)


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Door Lock Settings

      3. Select the setting by referring to the table below

        Display Default Content Setting Relevant ECU
        Unlock on second key turn

        On*1

        Off*2

        		 Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. On or Off Main body ECU (Multiplex network body ECU)
        Speed sensitive auto locking

        On*2

        Off*1

        		 Function that locks all doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
        Auto lock by shift from P

        On*1

        Off*2

        		 Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by shift to P

        On*1

        Off*2

        		 Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by driver door Off Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. On or Off Main body ECU (Multiplex network body ECU)

        • *1: for G.C.C. countries, Australia and New Zealand

        • *2: except G.C.C. countries, Australia and New Zealand

    3. Customizing with the combination meter assembly

      Tech Tips


      • Press and hold DISP switch (steering pad switch assembly) when entering an item.

      • Briefly press DISP switch (steering pad switch assembly) when selecting an item.


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        SPEED SENSITIVE AUTO. LOCK

        ON*2

        OFF*1

        		 Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF Main body ECU (Multiplex network body ECU)
        SHIFT-LINKED AUTOMATIC LOCK

        ON*1

        OFF*2

        		 Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed. ON or OFF Main body ECU (Multiplex network body ECU)
        SHIFT-LINKED AUTOMATIC UNLOCK

        ON*1

        OFF*2

        		 Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY). ON or OFF Main body ECU (Multiplex network body ECU)
        DRIVER DOOR-LINKED UNLOCK

        ON*1

        OFF*2

        		 Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. ON or OFF Main body ECU (Multiplex network body ECU)

        *1: for G.C.C. countries, Australia and New Zealand

        *2: except G.C.C. countries, Australia and New Zealand

      4. Press and hold DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.