POWER DOOR LOCK CONTROL SYSTEM PRECAUTION


  1. NOTICE FOR INITIALIZATION

    Note

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

    System Name See Procedure
    Parking Assist Monitor System

    Click here

    Power Door Lock Control System

  2. PRECAUTIONS WHEN USING INTELLIGENT TESTER


    1. When using the Intelligent tester with the power switch off to troubleshoot:

      Connect the Intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Intelligent tester and the vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).