WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester.


      1. Connect the intelligent tester.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Wireless Control ON Function that turns wireless door lock/ON or OFF ON or OFF Main body ECU (Multiplex network body ECU)
        Hazard Answer Back ON

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 ON or OFF Main body ECU (Multiplex network body ECU)
        Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF Main body ECU (Multiplex network body ECU)
        Unlock 2 Operation

        ON*1

        OFF*2

        		 Function that unlocks driver door when unlock switch on electrical key transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON or OFF Main body ECU (Multiplex network body ECU)
        Panic Function*3 ON Function to operate theft deterrent system by continuously pressing panic switch on electrical key transmitter for 0.8 seconds ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Resp*3 ON Wireless door lock buzzer response/ON or OFF ON or OFF Main body ECU (Multiplex network body ECU)
        P/W Ope buzzer ON Wireless power window buzzer response/ON or OFF ON or OFF Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Vol Level7 Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Main body ECU (Multiplex network body ECU)

        *1: for G.C.C. countries, Australia and New Zealand

        *2: except G.C.C. countries, Australia and New Zealand

        *3: except Europe

    2. Customizing with the combination meter assembly

      Tech Tips


      • Press and hold DISP switch (steering pad switch assembly) when entering an item.

      • Briefly press DISP switch (steering pad switch assembly) when selecting an item.


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        REMOTE 2-PRESS UNLOCK

        ON*1

        OFF*2

        		 Function that unlocks the driver door when the unlock switch on the electrical key transmitter is pressed once, and unlocks all doors when pressed twice. If the setting is OFF, pressing the unlock switch once makes all doors unlock. ON or OFF Main body ECU (Multiplex network body ECU)
        AUTO. RELOCK TIME ADJUSTMENT 30 s Function that regulates the interval between unlocking and automatic relocking of doors. 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        LOCK/UNLOCK ANSWER BACK ON

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 ON or OFF Main body ECU (Multiplex network body ECU)
        LOCK FEEDBACK VOLUME 7 Wireless door lock buzzer volume 0, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)

        *1: for G.C.C. countries, Australia and New Zealand

        *2: except G.C.C. countries, Australia and New Zealand

      4. Press and hold DISP switch (steering pad switch assembly).

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.