ULTRASONIC SENSOR (for Rear Side) INSPECTION


  1. INSPECT NO. 1 ULTRASONIC SENSOR


    1. A003Z4PE01
      Test in Illustration
      *a

      Component without harness connected:

      (No. 1 Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (BI) - 5 (EI) Always 10 kΩ or higher
      1 (BI) - 2 (BO)
      3 (SI) - 4 (SO) Below 1 Ω
      5 (EI) - 6 (EO)

      If the result is not as specified, replace the No. 1 ultrasonic sensor.