ULTRASONIC SENSOR (for Rear Side) REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE ULTRASONIC SENSOR ASSEMBLY (for Corner Sensor)


    1. for LH Side:


      1. A003ZMS

        Disconnect the connector.

      2. A003WTY

        Disengage the clamp.

      3. Disengage the 2 claws and remove the ultrasonic sensor assembly.

    2. for RH Side:


      1. A003V2O

        Disconnect the connector.

      2. A003WK6

        Disengage the clamp.

      3. Disengage the 2 claws and remove the ultrasonic sensor assembly.

  3. REMOVE ULTRASONIC SENSOR CLIP (for Corner Sensor)


    1. for LH Side:


      1. A003Z2SE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver, disengage the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

    2. for RH Side:


      1. A003WLAE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver, disengage the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Corner Sensor)


    1. A003V9R

      Disengage the 4 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

  5. REMOVE ULTRASONIC SENSOR ASSEMBLY (for Back Sensor)


    1. A003XQE

      Disconnect the connector.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. A003Y7U

      Disengage the clamp.

    3. Disengage the 2 claws and remove the ultrasonic sensor assembly.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  6. REMOVE ULTRASONIC SENSOR CLIP (for Back Sensor)


    1. A003VSBE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Back Sensor)


    1. A003V3Z

      Disengage the 4 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

      Tech Tips

      The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.