Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
To confirm the operation condition of this system, refer to Operation Explanation (System Description)
| Symptom | Suspected Area | See page |
|---|---|---|
| Although reverse (R) has been selected, a rear view monitor image is not displayed (the color of the LED on the inner rear view mirror assembly is green). | Reverse signal circuit | |
| Image from camera for rear view monitor is abnormal | ||
| Inner rear view mirror assembly | ||
| Although reverse (R) has been selected, a rear view monitor image is not displayed (the color of the LED on the inner rear view mirror assembly cannot change to green). | Inner rear view mirror power source circuit | |
| Inner rear view mirror assembly | ||
| When reverse (R) has been selected, a blue screen is displayed for 3 seconds before it disappears. | Image from camera for rear view monitor is abnormal | |
| Inner rear view mirror assembly | ||
| When a shift state other than reverse (R) has been selected, the rear view monitor image is displayed. | Reverse signal circuit | |
| Inner rear view mirror assembly | ||
| Image from the camera for the rear view monitor is abnormal (color, distorted picture). | Image from camera for rear view monitor is abnormal | |
| Inner rear view mirror assembly |