LEXUS PARKING ASSIST-SENSOR SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
When open circuit indication is displayed in self-check function, check for DTCs and troubleshoot according to each inspection procedure.

General
Symptom	Suspected Area	See page
System does not operate at all (self-check function does not operate)	Clearance warning ECU assembly power source circuit	Click here
	Clearance sonar main switch circuit	Click here
	Clearance warning ECU assembly	Click here
System can not be turned off	Proceed to "Clearance Sonar Main Switch Circuit"	Click here
System can not be turned off	Clearance warning ECU assembly	Click here

Sonar Function
Symptom	Suspected Area	See page
Frozen indication is displayed in self-check function	Precaution	Click here
	Replace ultrasonic sensor in part where frozen indication is displayed	-
	Clearance warning ECU assembly	Click here
Combination meter assembly (shift indicator) operates normally, but detection operates when park (P) has been selected, or detection does not operate when a shift state other than park (P) has been selected (front ultrasonic sensor)	CAN communication system	Click here
	Clearance warning ECU assembly	Click here
Combination meter assembly (shift indicator) operates normally, but detection operates when a shift state other than reverse (R) has been selected, or does not operate with reverse (R) selected (rear ultrasonic sensor)	CAN communication system	Click here
	Clearance warning ECU assembly	Click here
Detection operation operates even when vehicle speed exceeds the operation condition speed	CAN communication system	Click here
	Clearance warning ECU assembly	Click here

Buzzer Function
Symptom	Suspected Area	See page
Sonar detection operation is normal but buzzer operation is intermittent	Clearance warning buzzer circuit	Click here
	Clearance warning ECU assembly	Click here

Display Function
Symptom	Suspected Area	See page
Detection operation is normal but clearance sonar indicator does not illuminate	CAN communication system	Click here
	Combination meter assembly (Active Test)	Click here
	Clearance warning ECU assembly	Click here
Detection operation is normal but all sonar displays do not appear	CAN communication system	Click here
	Clearance warning ECU assembly	Click here
Detection operation is normal but sonar displays of multi-information display do not appear	CAN communication system	Click here
	Combination meter assembly	Click here
	Clearance warning ECU assembly	Click here
Detection operation is normal but sonar displays of multi-display do not appear*1	CAN communication system	Click here
	Multi-display	Click here
	Multi-media module receiver assembly	Click here
	Clearance warning ECU assembly	Click here