REMOTE TOUCH INSTALLATION


  1. INSTALL REMOTE TOUCH


    1. Engage the 6 claws to install the remote touch.

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. A003ZMX

      Engage the 12 claws to install the upper console panel sub-assembly.

      Note

      When installing the upper console panel sub-assembly, make sure not to pinch the wire harness connected to the front end of the remote touch (w/ Navigation System).

    4. Close the console compartment door.

  3. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. Engage the 3 guides, clip and 4 claws to install the upper No. 1 console panel garnish.

  4. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. Engage the 2 guides, clip and 5 claws to install the upper No. 2 console panel garnish.

  5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A003X7I

      Engage the 4 guides and 7 claws to install the lower center instrument panel finish panel.

    2. Close the glove compartment door.

  6. ADJUST CLOCK