MULTI-DISPLAY DISASSEMBLY


  1. REMOVE DISPLAY MODULE BOARD


    1. A003YC0

      Disengage the 4 claws and remove the lower center instrument cover.

    2. A003Y0Y

      Disconnect the 2 connectors.

    3. A003Y3W

      Remove the 2 screws and display module board.

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL COVER


    1. A003YIG

      Remove the 5 screws and instrument cluster finish panel cover.

  3. REMOVE SENSOR WIRE


    1. A003W1QE01
      Text in Illustration
      *1 Tape

      Peel back the tape used to secure the wire harness only enough to allow removal of the wire harness.

      Tech Tips

      Tape is not available as a supply part. As the tape will be reused, peel back the tape only enough to allow removal and installation of the wire harness.

    2. Disengage the 2 clamps.

    3. A003YNP

      Remove the screw.

    4. Disengage the 3 claws and remove the sensor wire cover.

    5. A003Y5X

      Remove the sensor wire.

  4. REMOVE NO. 3 INSTRUMENT PANEL FINISH PANEL RETAINER


    1. A003XRY

      Disconnect the 2 claws and disengage the 2 clamps.

    2. A003W07

      Remove the screw and disengage the clamp.

    3. A003ZO2

      Remove the 3 screws and No. 3 instrument panel finish panel retainer.

  5. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL RETAINER


    1. A003ZUF

      Remove the 5 screws, No. 2 instrument panel finish panel retainer and No. 1 instrument panel finish panel retainer.

  6. REMOVE INSTRUMENT PANEL REGISTER CONTROL GEAR


    1. A003ZE5

      Remove the instrument panel register control gear.

  7. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. A003WRY

      Remove the 2 tapes.

    2. A003XRE

      Remove the 4 screws.

    3. A003VM0

      Disengage the 4 guides and remove the upper instrument cluster finish panel as shown in the illustration.

  8. REMOVE MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY


    1. A003W7V

      Remove the 2 tapes.

    2. A003YGI

      Disengage the 2 claws and clamp.

    3. Remove the 3 screws and multi-display controller sub-assembly.

  9. REMOVE MULTI-DISPLAY ASSEMBLY


    1. A003VOC

      Remove the 4 screws and multi-display assembly.

  10. REMOVE MULTI-MEDIA MODULE WIRE


    1. A003WPT

      Disconnect the 2 connectors.

    2. Disengage the clamp and remove the multi-media module wire.

  11. REMOVE NO. 2 EARTH WIRE


    1. A003Y34

      Remove the screw and No. 2 earth wire.

  12. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A


    1. A003XK7

      Remove the 2 screws and multi-display controller bracket A.

  13. REMOVE MULTI-DISPLAY CONTROLLER BRACKET B


    1. A003VSH

      Remove the screw and multi-display controller bracket B.

  14. REMOVE MULTI-DISPLAY