NAVIGATION SYSTEM (for DVD) Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK MAP DISC

   
   
   1. 

      Check that the map disc is not deformed or cracked.

      OK
      No deformations or cracks on the map disc

   
   
   • OKClick here
   • NGClick here
2. Click here

   REPLACE MAP DISC

3. Click here

   CHECK CABIN

   
   

   1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

      Tip:
      

      • A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.

      • The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

      OK
      Condensation is not likely being produced and the temperature is not high or extremely low.

   
   
   • OKClick here
   • NGClick here
4. Click here

   SET CABIN TO APPROPRIATE TEMPERATURE

5. Click here

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLEClick here