NAVIGATION SYSTEM (for DVD) Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

Note


  • If standard size tires are not installed, the vehicle position mark may deviate from the route even if the navigation system is operating normally.

  • Make sure that standard size tires are installed to the vehicle before inspection.

PROCEDURE


  1. CHECK GPS MARK


    1. A003XCLE03
      Text in Illustration
      *a Example

      Check that the GPS mark is displayed.

      OK
      GPS mark is displayed.

    NG

    GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE Click here

    OK

  2. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check Click here.

    2. A003YVW

      Check that the display changes between ON and OFF according to the shift state.

      OK
      Shift State Display
      Except R OFF
      R ON

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG

    GO TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here