NAVIGATION SYSTEM, Diagnostic DTC:B15C0, B15C1

DTC Code DTC Name
B15C0 GPS Antenna Connection Malfunction(short)
B15C1 GPS Antenna Connection Malfunction(break)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation antenna assembly*1 or roof antenna assembly*2.

DTC No. DTC Detection Condition Trouble Area
B15C0 Navigation antenna error

  • Harness and connector

  • Navigation antenna assembly*1

  • No. 2 antenna cord sub-assembly*2

  • No. 3 antenna cord sub-assembly*2

  • Roof antenna assembly*2

  • Roof antenna pole sub-assembly*2

  • Multi-media module receiver assembly
B15C1 Error of the power source to the navigation antenna

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.

PROCEDURE


  1. CONFIRM MODEL


    1. Choose the model to be inspected.

      Result
      Model Proceed to
      w/o Blocking System A
      w/ Blocking System B

    B

    REPLACE HARNESS AND CONNECTOR (NO. 2 ANTENNA CORD SUB-ASSEMBLY - MULTI-MEDIA MODULE RECEIVER ASSEMBLY) Click here

    A

  2. REPLACE HARNESS AND CONNECTOR (NAVIGATION ANTENNA ASSEMBLY - MULTI-MEDIA MODULE RECEIVER ASSEMBLY)


    1. Replace the harness and connector.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE NAVIGATION ANTENNA ASSEMBLY Click here

    OK

    END

  3. REPLACE NAVIGATION ANTENNA ASSEMBLY


    1. Replace the navigation antenna assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END

  4. REPLACE HARNESS AND CONNECTOR (NO. 2 ANTENNA CORD SUB-ASSEMBLY - MULTI-MEDIA MODULE RECEIVER ASSEMBLY)


    1. Replace the harness and connector.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY Click here

    OK

    END

  5. REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Replace the No. 2 antenna cord sub-assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY Click here

    OK

    END

  6. REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Replace the No. 3 antenna cord sub-assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE ROOF ANTENNA ASSEMBLY Click here

    OK

    END

  7. REPLACE ROOF ANTENNA ASSEMBLY


    1. Replace the roof antenna assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE ROOF ANTENNA POLE SUB-ASSEMBLY Click here

    OK

    END

  8. REPLACE ROOF ANTENNA POLE SUB-ASSEMBLY


    1. Replace the roof antenna pole sub-assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END