PILLAR SPEAKER (for Rear Side) INSPECTION


  1. INSPECT REAR NO. 2 SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A003ZD0E04
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 2 Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      for 13 Speakers:
      Tester Connection Condition Specified Condition
      1 - 2 Always 4.6 to 7 Ω

      If the result is not as specified, replace the speaker.