PILLAR SPEAKER (for Front Side) INSTALLATION


  1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY


    1. Engage the 3 claws to install the front No. 3 speaker assembly.

      Note

      Do not touch the speaker cone.

  2. INSTALL FRONT PILLAR GARNISH


    1. Remove the protective cover.

    2. A003ZSXE01
      Text in Illustration
      *1 Front Pillar Garnish Clip
      *2 Protective Tape

      Make sure that the front pillar garnish clip is not damaged.

      Note


      • If there is any damage, replace the garnish clip with a new one.

      • When a garnish clip is being replaced, make sure to install it in the direction shown in the illustration.

    3. Engage the 2 guides by moving the garnish in the direction indicated by the arrow (1).

    4. Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish LH.

      Tech Tips

      Tape the tips of the needle-nosed pliers before use.

    5. A003X4Z

      Engage the 2 clips to install the front pillar garnish LH.