PILLAR SPEAKER (for Front Side) REMOVAL


  1. REMOVE FRONT PILLAR GARNISH


    1. A003WN2E01
      Text in Illustration
      *1 Front Pillar Garnish Clip

      Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.

      Tech Tips

      Make the front pillar garnish LH hang down from the front pillar garnish clip.

    2. A003X1NE01
      Text in Illustration
      *1 Protective Tape

      Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and remove it from the front pillar garnish LH.

      Note


      • Front pillar garnish clips are reusable if they are not removed from the vehicle and have no damage.

      • Replace the front pillar garnish clips with new ones if they are removed from the vehicle.

      Tech Tips

      Tape the tips of the needle-nosed pliers before use.

    3. Disengage the 2 guides.

    4. w/o Front Center Speaker:


      1. Remove the front pillar garnish LH by pulling it in the direction indicated by the arrow (2) in the illustration.

    5. w/ Front Center Speaker:


      1. Disconnect the front pillar garnish LH by pulling it in the direction indicated by the arrow (2) in the illustration.

      2. Disconnect the connector and remove the front pillar garnish LH.

    6. A003YYHE01
      Text in Illustration
      *1 Adhesive Tape
      *2 Protective Cover
      *3 Curtain Shield Airbag Assembly

      Protect the curtain shield airbag assembly.


      1. Cover the airbag with a cloth or piece of nylon and secure the ends of the cover with tape as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  2. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A003XSV

      Disengage the 3 claws and remove the front No. 3 speaker assembly.

      Note

      Do not touch the speaker cone.